Star Trek: Prodigy Protostar Combadge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make the badge from the animated series Prodigy.
- Rating
- 4.8 / 5
- Likes
- 58
- Downloads
- 280
- Makes
- 6
- Views
- 716
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
Simple model but needs some effort to be printed with the best quality. You can achieve this by either printing it upright with supports or flat with a very fine layer height.
Updated April 17 2024 - The badge felt a little too small so increased the scale a bit and now it feels better.
I printed flat at .05mm layer height, 100% infill, supports enabled for magnet holes, and drew the z-seams where it wouldn't interfere with the face of the badge. Takes about 2 hours to print with those settings, but the results were much better than expected.
Uses 6x2mm magnets. I had to arrange the magnets a little oddly on the back in order to prevent them from affecting the perimeter wall thickness too much.
Display stand included.
Filaments used
I used CC3D antique gold PLA which gave it a nice golden luster.