Faces - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Found some cool art by @taeko.vx and @ghostygeisha on Instagram and wanted to make them into a hueforge
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 69
- Makes
- 2
- Views
- 365
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Grey
PLA+ Sunlu White
Plate 1 (face.stl):
Start with Black
At layer #10 (0.88mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.
Plate 2(eyes.stl):
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.
Plate 3(hand.stl):
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #17 (1.44mm) swap to White for the rest.
Plate 4(eyes2.stl):
Start with Black
At layer #10 (0.88mm) swap to Grey
At layer #16 (1.36mm) swap to White for the rest.
Plate 5(face5.stl):
Start with Black
At layer #5 (0.48mm) swap to Grey
At layer #11 (0.96mm) swap to White for the rest.
Plate 6(eye.stl):
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #17 (1.44mm) swap to White for the rest.