biscuit joiner attachment (Dewalt DW682k)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attachment for the biscuit joiner to have more support surface.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 136
- Makes
- 0
- Views
- 844
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Attachment for the biscuit joiner to have more support surface when routing into the surface of the workpiece. The router tilts slightly here, as a lot of weight presses down. The fence allows the router to be guided more safely and easily.
Print instructions:
- 8 Wall loops for enough strength
- 30% cubic infill
- minimize warping, e.g. smooth plate with glue
- PLA for stiffness
Hardware: Use M6 hardware, they fit through the printed and existing holes.
Deutsch:
Anschlag für die Flachdübelfräse um mehr Auflagefläche zu haben beim Fräsen in die Fläche vom Werkstück. Hier kippelt die Fräse leicht, da sehr viel Gewicht nach unten drückt. Durch den Anschlag kann man die Fräse sicherer führen.