1 / 7
Ikea Solbo Owl Nightlamp Shader - Hull to darken / color the kids nightlight — image 1
1 / 7

Ikea Solbo Owl Nightlamp Shader - Hull to darken / color the kids nightlight

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An easy to print shade to darken the really nice (but too bright) nightlight Owl made by Ikea.

Rating
0 / 5
Likes
8
Downloads
60
Makes
0
Views
1,051
Reviews
0

Updated at source:

Model information

Category
Bedroom
License
Creative Commons — Attribution

Ikea's SOLBO owl nightlight is a really nicely made light for kids rooms. However, the usual critique is the far too bright light. 

Ikea used an unusual 24V LED lamp with a custom connector. So just changing the LED didn't work easily. So, I created a hull, which can be pulled over the inner LED. The LED keeps very cool - No problem to use PLA or PETG. 

Based on the thickness, you can adjust the brightness, so use the added test_plates first. 

They allow you to choose the right color and thickness (0.4,  0.8, 1.2 and 1.6mm). 

Printing the hull requires up to 6 ½ hours if you print the 1.6mm one. Again, please use the test_plates first. 

The cover photo is Eryone PETG Gray with 1.2mm. 
Using just white filament will darken slightly even with 1.6mm thickness, as you can see in the second photo. 

Just try out your filament colors. Geeetech Silky Copper PLA looks cool too. 


Printing

You don't need any support. Just turn the model upside-down, and the plate will hold nicely. 

I used concentric patterns for top and bottom layers and ensure that you enter 4 perimeters (walls) so that you have enough material to darken the lamp. 

Tags