1 / 7
35mm Film Scanner for Sony E mount APSC cameras — image 1
1 / 7

35mm Film Scanner for Sony E mount APSC cameras

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed 35mm film scanner using Sony A5100 (or equivalent) camera with APSC sized sensor and Tominon 50mm Lens

Rating
0 / 5
Likes
30
Downloads
93
Makes
0
Views
2,238
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Took the base scanner assembly and adapter tube from https://www.printables.com/model/237687-35mm-film-digital-mirrorless-scanner-holder and added an upper section sized for a 50mm Tominon Macro Lens with adapter tubes to connect to a Sony e Mount camera.

I used a Sony A5100 with a 24MP APSC Sensor.

The Tominon 50mm F4.5 lens is very good quality, originally supplied with Polaroid instant film macro scanners.  Available on EBay, got mine for $30 including shipping.

Ebay search: https://www.ebay.com/sch/i.html?_from=R40&_nkw=tominon+50mm+F4.5+lens&_sacat=0&_odkw=tominon+50mm+lens&_osacat=0

The scanner parts I included use other 3D Things, with tube adapters merged into them.

Things used:

Sony E-mount adapter - https://www.printables.com/model/228702-e-mount-to-microscope-adapter

39mm Lens adapter - https://www.thingiverse.com/thing:2800468

I sliced and diced these designs with Microsoft 3D Builder to make the stl files in my version.

You can also print an E mount Lens base cap to store the scanner when not in use.

Example: https://www.printables.com/model/95626-rear-lens-cap-for-sony-e-mount

I used an inexpensive USB light table for the light source: https://www.amazon.com/Negative-Ultra-Thin-Backlight-Sketching-Stenciling/dp/B0B5GL6Q4M

 

You will need to glue the lower focus ring onto the Base Tube, and use 3 X25mm X3mm socket head bolts with 3mm nuts and washers to make a three axis focus and plane adjuster for the upper focus tube assembly with the camera and inner and outer tubes inserted.  

I found a distance of 62mm from the lens base (Bottom of thread where Tominon lens body hits the “camera”) to the base of the E-mount Sony camera.  This distance is held by the two inner and outer e-mount tubes.  Mine was a friction fit, but you could glue it after you are sure of the alignment.

The distance from the E-mount base of the Sony camera to the top of the 35mm film holder was 176mm.

I used the excellent 35mm reference target from VLADS to calibrate the focus and framing of the scanner:

https://www.amazon.com/Resolution-Test-Target-Vlads-Resolution/dp/B0BYLYRTZJ

Turn on the USB light table to max intensity, place the assembly on the thing, insert a 35mm negative (Emulsion side up)  into the base, and start scanning.  I used the IEDT Sony application with a Windows PC to capture frames.  Set the camera to BULB, manual focus, manual aperture.  I set the lens to F8 for some depth of field, Set the camera to ISO 200, and let the auto exposure do its thing.  Usually got between 1 and 2 second exposures depending upon the film density.

I use the freeware Fastone Image viewer to process the images.  Workflow is as follows:

  1. Flip horizontal (We are scanning inverted as we want the emulsion toward the lens)
  2. Crop 3:2 
  3. Negative (gives non color corrected negative if using color negatives)
  4. Color correction using Adjust Colors or Adjust Levels.  You will need to experiment to get good color balance, but you can save the settings so that the next scan is very quick to correct.
  5. Save file.

Using VLADS resolution pattern, I get approx. 1500 DPI for the scan.  I scan at maximum resolution, and don't bother with RAW scanning, as that add too much to the workflow with very little enhancement. I have attached a VLADS resolution example.  Very happy with the results.

If you look at the cropped image, it shows the scan next to the interpretation scale.

On the “0" section, you can see the three lines at the “2” subsection, which is approx 69 lines/mm, or around 1500 DPI.

I attached a photo of my long departed Samoyed dog from 1986.  I chose this photo to show how the scanner can bring back memories from a random envelope of negatives.  I also included this one because of the lighting, which accentuates the film grain in the scan.

Have fun!