1 / 4
CWWK Mini N-Series Heatsink M3 LNut — image 1
1 / 4

CWWK Mini N-Series Heatsink M3 LNut

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mounting nuts for @filament_286802's 120mm top fan mount (see the remix link) that uses slightly more common hardware.

Rating
0 / 5
Likes
4
Downloads
52
Makes
0
Views
465
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't have the right length M2.5 screws, my M2.5 threaded inserts were press fit and I didn't want to wait for more hardware to come in, so I adapted the L nuts to what I had on hand.

You will need:

  • 4 x “M3nS” - M3 DIN 562 square nuts commonly used in 3D printer builds.
  • 4 x M3-0.5x16mm screws.

Just print the part (I used 0.2mm 15% infill, no supports, square slot vertical with the wide end on the bottom), slide the square nut in, attach to the fan mount plate, slide it onto your router, and tighten.