1 / 4
Indoor Over Door French Cleat Hanger — image 1
1 / 4

Indoor Over Door French Cleat Hanger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Indoor Over Door French Cleat Hanger

Rating
0 / 5
Likes
0
Downloads
22
Makes
0
Views
145
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

I have two whiteboards that I had attached to my closet doors in my office using command strip velcro but they kept falling down and getting damaged every few months (as well as damaging things they fell on/against). Most whiteboards have a metal lip on the back that can often be used for hanging the whiteboard. This is similar to most french cleat designs. However, I didn't want to make holes in my doors so I measured the gap over and around the doors instead. This over the door hanger is designed to go over most standard indoor doors at ~36mm thickness. Since they are printed on their side they retain their structural rigidity for the cleat portion of the hook. I used several, spread across the top of the door, to spread the load for my whiteboards. They work flawlessly and blend in depending on the color filament used.

I recommend PETG/ABS/ASA so they won't sag or warp, even in a warm office. PETG/ABS/ASA also allows for a bit of flex over some other materials. I printed with 0.6mm nozzle width on a 0.4 nozzle and they only took a couple hours to print 4x at once at 0.2 layer height and 60-80mm/sec.

Tags