RatRig VCore3 Roller Caster Plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Generic Roller Caster Plates to attach to a RatRig VCore instead of the metal plates
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 35
- Makes
- 0
- Views
- 440
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are quick and deadly easy replacements for all the generic 42 mm roller casters. The plates attach as substitute of the metal plates to your VCore. You will just need 2 20 mm hex M6 and 12 mm max heat inserts M6 per corner. As there is quite a bit of strain on these PCCF with 4/4/4 layers and 40% infill will do the job.
I got my roller caster cheap and really quick (less than a week) from here: https://www.aliexpress.com/item/1005003228464448.html?spm=a2g0o.order_list.order_list_main.18.12021802LlWyiw
Although there a quite similar models out there I really started off from the scratch, so I will not mark this as a remix.