1 / 4
Router jig - Masons mittre for worktops
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jig for router to create masons mittre joins. Jig can be fixed to the workpiece by standard Bosh track clamps
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 479
- Makes
- 0
- Views
- 2,342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Jig is designed to work with 30mm deep join for 750mm depth of worktop. You can simply do the math for narrowed pieces. Depth of the join is 35mm maximum, for smaller inset depth just offset the jig “to the left” on the pictures
Print instructions:
- PLA
- 0.3 layer height
- 0.6 nozzle
- Bottom thicknes 3mm
- 5 perimeters
- Top surface none
- Infill Honeycomb
Process of milling:
- Jig is created for 10mm mill and 17mm copy ring
- Male join is straightforward just align the jig clamp and done - for 30mm inset of male desk part
- Female join
- First you need to cut excess material from internal part of the join (30mm)
- Stop the cut 690mm from the end and cut the excess off by handsaw
- Then align the female jig and use your router to mill of the excess material
Update 2025-11-02:
- New pair of files added to fit imperial collets and mills. Made for ¾" collet with ½" mill. Not tested, I hope it'll work well…