1 / 2
Outfeed Roller Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for a material outfeed roller. Sized for a 3/8in carriage bolt, should fit 2 and 2.5in PVC or other rollers.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Shown with 10x30mm bearing and a simple bushing (sorry for mixed standards, its what I had on hand). Holes for the carriage bolt can be a little tight if your horizontal expansion is not set right, but they can be tapped in place with a hammer if necessary.