Gryphon 1.3 Fidlock Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plates for Fidlock studs for the Gryphon 1.3 platform
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
This is a modified version of my 3-piece mech cover remix of the Gryphon, it adds monting holes for two Fidlock studs with a spacing of 60mm, so it's compatible with the Sholster and my Sholster L or whatever you use with your Meowsers, Quiks, Pew Pews etc... It's also designed in both a Left handed and a Right handed version.
Printing Instructions
The Top can simply be printed with the bottom face on the buildplate. The parts marked with a 1 (the parts with the studs holes) need to be printed with the internal face on the buildplate and supports from the buildplate enabled. The parts marked with a 2 can be printed with the external face on the buildplate with no supports.
Assembly Instructions
The three parts can be screwed with four m3x10mm hex bolts from the top piece, the studs should easily screw in, if not a bit of care in screwing the studs straight and a bit of force should do the trick.