1 / 3
X-Acto Case Holder for Honeycomb Storage Wall
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Honeycomb Storage Wall mounted shelf/box to hold and display the X-Acto 3 Knife Set
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Made to work with this set from amazon
https://www.amazon.com/gp/product/B00551D4AM
Secure to wall using the M3 inserts (STL included) and M3x8 Socket-head screws.
Printing Instructions
- No supports needed.
- Print as-is for a solid bottom for the box.
- Print with 0 top/bottom layers with a honeycomb infill to get the hex pattern for the base (as seen in photo).
- Play with infill density until the hexs are a size you like.
- Increase the number of perimeters/wall loops to match the wall thickness.
(actual number will vary depending on your setup)