Acura oil funnel fits 4cyl 2.0L 2024 and more...
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits more than 2024 and Hondas as well I'm sure
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 45
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Hey there, hope this finds you well. I couldn't find a model that fits, and what better way to learn how to design threads :)
I modeled after my 2024 Acura RDX that has a 4 cylinder 2.0L engine. The tread pitch is 3.0 mm/ thread. the Bore(valley) of the threads is 30.0mmOD.
Print the funnel with the large end down, print the holder with the opening facing up. Use the holder to hold the o-ring in place while the glue dries. Use CA glue in the o-ring grove.
O-ring is 1/8" cross section, sized as a 221 R27, but my cheap o-ring kit is off a bit and the 220 R26 works best.
I printed with 8 layers for everything, so its pretty much solid. I prefer PETG but you use what you want, but use a plastic that is durable and not to break off inside your engine!
As with all of my prints, please use at your own risk.