Minimalist Nintendo Switch Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flat-pack, press-fit, ultra-portable stand for the Nintendo switch
- Rating
- 4.8 / 5
- Likes
- 27
- Downloads
- 263
- Makes
- 4
- Views
- 699
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Here is an ultraportable, flat-pack, minimalist stand for the Nintendo Switch. I designed this because I needed something I could put in the pocket of my Switch case that wouldn't take up too much space. The two parts (grouped together in the model files) slot together to form the stand and press fit together for easy storage. The design allows enough clearance for most USB-C cables to pass through the stand easily. Prints in about 90 minutes at 0.2 layer height (I recommend 3 perimeters to strengthen the protruding lip and the receiving opening). Its bounding box of 150mm x 60mm means you can print it on a Prusa Mini. Enjoy!
Print Settings:
- Material: PLA (or any plastic, but PETG would minimize creep in the holes when the parts are press-fit)
- Layer Height: 0.2 mm (or above)
- Nozzle Diameter: 0.4 mm (or above)
- Supports: none