1 / 4
Sanding block 45 degree
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For sanding both 45 degree and 90 degree
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 93
- Makes
- 0
- Views
- 657
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
For using a “common” 170x65x24 mm sanding pad. With this block you can sand 45 degree or 90 degree.
Use four 4.5x30 mm wood screws and paper of choice.
Note! If you don't have the base pad, there is a model for printing that also!
Print instructions: The lower (big) part prints laying. I did rounded corners because of ergonomy. You might wanna use support on base plate only (very minimal support is needed).
