Relay-socket printed in 54 min
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Relay socket compatible for "Finder" 5 pins relays.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — NoDerivatives
Hi everyone,
I have prepared for you a relay socket from 2 printed components.
If you are engineer and working with electronics you will need this relay socket.
This relay socket it's compatible with "Finder" 5 pins relays.
Printing specification:
- Optimal printing parameters.
- Supports not necessary.
- Layer high 0.2mm
- Print time 54 min.
Recomanded materials:
- PETG
- PLA
Necessary materials for relay-socket:
- Drowned head screw M2x10mm →Qty-3
- Standard hex-nut M2 →Qty-3
- Female contact-crimped type-MTE-C-R - ADAM TECH →Qty-5
- Finder relay 34.51.7.024.0010
Please follow the assembly instruction bellow:
- With screw driver insert in part “Relay-Socket-1.stl” the female contacts and hex nut.
“Female contact” see in picture bellow:
2. Use 0.2-0.3 mm wire for soldering “female contacts” see picture bellow:
3. Put together part “Relay-Socket-1.stl” and “Relay-Socket-2.stl” see in picture bellow:
4. Insert screws in “Relay-Socket-2.stl” and screw in with a screwdriver.
Everything is ready, all you have to do is insert the relay into the socket.
See a picture from my work where I used this relay socket.
I hope was useful for you, happy printing.