Lamp #2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multi-shade lamp built on Lamp Base#1.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 60
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a multi-part lamp made using the Lamp Base,
https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e14.
There are 2 shades and the base which is attached to the Lamp Base using the e14 collar and then the shades are inserted into the base.
The shades were printed using, Colorfab Red PLA and Sunlu White PLA+.
The slicer settings for the shades..
.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s
Seam Position- Random
The filament for the lamp base and the CLBase:
Prusament Galaxy Black
Standard .20 settings, seams - Random.
The electrical parts:
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX