Lamp #3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A abstract lamp shade model that can use Lamp Base#1.
- Rating
- 5 / 5
- Likes
- 136
- Downloads
- 480
- Makes
- 1
- Views
- 2,147
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A abstract lamp shade model that can use Lamp Base#1,
https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e1.
180 mm height x 105 Width
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
The slicer settings for the stand and screw-on cap:
.20 mm Standard and
(All standard settings and speeds, Random seam settings
Filament: Prusament Vanilla White
The shade itself was printed using a Yellow PLA ..
Fillamentum PLA Extrafill Melon Yellow
The slicer settings:
.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s
Seam Position- Random