1 / 2
RGB LED Clock Case (64x32 Matrix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printed Case for a RGB LED Matrix Raspberry Pi powered Clock
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 147
- Makes
- 0
- Views
- 1,775
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Everything was printed with PLA. The screen has a layer height of 0.2 mm over the pixels and around the pixels there is a mesh on a layer height of 0.4 mm to minimize warping from the heat coming from the LED matrix. It is important to print the Screen on the lowest layer height possible (max 0.2 mm). The screen is attached to the Back by 16mm M2 screws
The ScreenBack part can be printed on any layer height and the models are provided to maybe fitted to other Raspberry Pi models and/or use other size of screws.