Pin Vise for ER11 Collets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pin Vise for ER11 Collets
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 1
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Pin Vise for ER11 Collets
If you have one of the popular 3018 Tabletop CNC mills, you probably have a set of ER11 collets for it. A typical set has collets from 1.0 to 7.0 mm in 0.5 mm increments, plus a 3.125 collet specifically for 1/8" shank cutters. They will typically clamp a shank a little larger or smaller than the nominal size, so most anything from a little under 1 mm to a little over 7 mm can be used.
This is a pin vise made to fit those collets. It's on the large size for a pin vise, but that's called for since it can handle tool shanks of around 7 mm. Most pin vises aren't intended for anything anywhere near that size. It's still smaller than a drill chuck.
Printing:
Material: PLA
Nozzle: 0.3 mm
Shells: 0.8 mm
Infill: 16%