Gridfinity D / R20 / LR20 battery bins
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.75 – €0.92 net (excluding VAT)
For file: Gridfinity Spacer 1x2x6_0.4n_0.2mm_PLA_MK4IS_34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.84 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 34.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Gridfinity bins for 2 or 4 D / R20 / LR20 batteries, can be stacked using the included spacers
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 185
- Makes
- 2
- Views
- 537
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers.
- A 1x2x4 bin that fits 2 batteries.
- A 2x2x4 bin that fits 4 batteries.
- A 1x2x6 spacer that is needed to stack the 2-battery bins.
- A 2x2x6 spacer that is needed to stack the 4-battery bins.
NOTE: The spacers are best printed upside down with a brim to improve bed adhesion.
The base box is generated with the Fusion 360 GridfinityGenerator, https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789.