1 / 4
Photovoltaik Mast Halterung für 2x100Watt-Panele — image 1
1 / 4

Photovoltaik Mast Halterung für 2x100Watt-Panele

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Photovoltaik Mast Halterung für 2x 100Watt-Panele (Panelgröße 900x670mm)

Rating
0 / 5
Likes
13
Downloads
57
Makes
0
Views
2,422
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Kunststoffteile für eine Photovoltaik-Mast-Halterung für zwei Panele (900x670mm).

Angegeben sind unten die Teile für meine Konstruktion, natürlich sind wie immer anpassungen möglich ganz nach euren bedürfnissen.

Für meine Halterung werden folgende zusätzliche Teile benötigt:

Aluminium-Profil(mm) 30x30x3 länge 700mm
Aluminium-Profil (mm) 20x30x2 länge 1520mm
Aluminium-Profil (mm) 20x30x2 länge (variable/reststück nutzen)
Mast-Rohr (Stahl/Alu) Durchmesser 60,3mm länge 2000mm

Schraube M12 für die Hauptbefestigung am Halte-Kopf
2xM8 + Muttern für die Querverstrebung.
16x M4x20mm Senkkopfschrauben + Muttern für die Klemmhalter.

Eine 12mm Bohrung müsst ihr setzen im 30x30er Profil genau Mittig einmal durch.  Siehe Bilder.

Ihr müsst folgende Teile drucken:

1x Haupthalterung, 2x Profil-Verbinder, 1x Halter_für_Stütze, 1x Mastklemmhalter, 2x Steckverbinder-Stütze, 8x Solarpanel-Klemm-Halter_Teil1, 8x Solarpanel-Klemm-Halter_Teil2.

Die Teile sollten genau in der ausrichtung gedruckt werden wie sie in den 3mf Dateien vorliegt. Ansonsten gibt es probleme mit der Passgenauigkeit.

Meine Teile sind aus PETG gedruckt wegen der UV beständigkeit.

 

English:

Plastic parts for a photovoltaic mast holder for two panels (900x670mm).

Below are the parts for my construction, of course, as always, adjustments are possible according to your needs.

The following additional parts are required for my bracket:

Aluminum profile (mm) 30x30x3 length 700mm
Aluminum profile (mm) 20x30x2 length 1520mm
Aluminum profile (mm) 20x30x2 length (use variable / remaining piece)
Mast tube (steel / aluminum) diameter 60.3mm, length 2000mm

M12 screw for the main attachment to the holding head
2xM8 + nuts for the cross bracing.
16x M4x20mm countersunk head screws + nuts for the clamp holder.

You have to put a 12mm hole through exactly in the middle of the 30x30 profile. See pictures.

You have to print the following parts:

1x main bracket, 2x profile connector, 1x holder_for_stütze, 1x mast clamp holder, 2x connector support, 8x solar panel clamp holder_Teil1, 8x solar panel clamp holder_Teil2.

The parts should be printed in the exact orientation as shown in the 3mf files. Otherwise there are problems with the accuracy of fit.

My parts are printed from PETG because of the UV resistance.

Tags