1 / 12
Replacement xTOOL S1 Exhaust Adapter 3" (77mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement adapter for the xTOOL S1 diode laser to be able to connect to a 3" (77mm) exhaust tube.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 263
- Makes
- 2
- Views
- 1,462
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About the design
I recently bought an xTOOL S1 diode laser engraver/cutter. Once unpacked it was found that the exhaust port adapter that is supplied with the S1 is too large to connect to the xTOOL Fume extractor that I also purchased.
My version of the exhaust port adapter allows the S1 to connect to a 3" (77mm) flexible extractor tubing. It uses the same footprint as the original adapter, and utilizes the same Four M3 screws. Created in Alibre Atom3D.
Parts
- 1 - printed exhaust port adapter
- 4 - M3 screws (from existing unit)
- 1 - 90mm pipe/tube clamp
- or Zip ties.
Printing info
- 4 walls
- 0.24 layer height
- PLA/ABS/PETG material
- 30% infill
- Supports = YES
- Threshhold Angle = 25 deg
- On build plate Only