1 / 4
Dual SSD / 2.5" Drive Mount for Wall or Panel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This simple mount allows for two 2.5" size drives to be mounted securely and compactly on a panel or wall.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 419
- Makes
- 1
- Views
- 1,203
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a simple holder for two SSDs or laptop hard drives. It is designed to be mounted on a wall or board.
The drives are attached using the standard drive mount hardware, and I used small wood screws to attach the frame to the board.
This was built to mount my drives in a bartop arcade machine I built.
This should print in any material, thought you may not want to use PLA if your drives will get very hot, I used PETG.