24mm, 29mm, 38mm Rocket Stands
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My rendition of another model Rocket stand, I have versions for 24mm, 29mm and 38mm. Legs print separately to give you…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 76
- Makes
- 0
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
My rendition of another model Rocket stand, I have versions for 24mm, 29mm and 38mm. Legs print separately to give you the option to print different colors. No supports needed. Rocket tube and body are separate. If you have an idex you can print multicolor. Otherwise in cure select all and merge to combine. Make a support blocker and adjust the infill of the top 2/3’s to 100% for strength (see picture). No hardware needed, the legs will slide into the body. Some minor post processing cleanup may be needed depending on your printer. I used a small mallet to make the legs flush with the bottom.
Print Settings
Rafts:
Doesn't Matter
Resolution:
.125
Infill:
30%
Filament: n/a PLA
Category: Hobby