Ipad/Android Tablet & Phone Simple Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model I made for various tablets and phone devices to the wall for charging or use for easy touch screen access. I…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 111
- Makes
- 0
- Views
- 757
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
A model I made for various tablets and phone devices to the wall for charging or use for easy touch screen access.
I personally use a pair for an Ipad Pro and a Samsung S3 tablet. The slide is about 9.5mm across so you can figure if you have a device with a cover, as long as it's thickness is less than that, it should still be able to fit. Since without any coveres the devices still have some room.
I usually feed the charging cord through one of the slots when not in use.
Print model on the side with opening facing up, no supports needed.
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
No
Supports:
No
Resolution:
0.2-0.3
Infill:
25%+
Filament: Dikale PLA Black
Notes:
Print a pair and adjust on the wall accordingly. Hole for screw is just under 4mm diameter depending on your print layer accuracy.
Opening/slot where tablets and devices slide into is approx: 9.5mm.Total overall model length is just about 75mm.Post-Printing
Category: 3D Printing