1 / 3
Dragon burner voron tap Adxl345 mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add the adxl between the crowl and the tap
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 29
- Makes
- 0
- Views
- 1,041
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
The Spacer is for 4 longer screws so it don't come out from the other side of the mount. I used 4mm M3 with the 1mm spacer, If you have 3mm then it should be fine without it
Requires:
- 2x 6/8mm M3
- 2x 3/4/5mm M3
Don't over tighten the screw for the adxl to the mount, it will strip
Alternately, just glue the adxl and don't use the 2 short screws or a dab of glue on the thread of the screw or uses flathead screw.