Lamp Base #3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A general purpose stand for an e14 socket. Can be used for a lamp shade or extension for a taller lamp
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 95
- Makes
- 0
- Views
- 551
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A general purpose stand for a lamp using an e14 socket. Can be used for a lamp shade, between 29 and 34 mm space and secured with the e14 collar.
Inserts for the nut base are shown, allowing the base to be connected with M3 by 10mm hex screws.
3 of the 10mm mutter, nuts, can be glued into the attachable base to add some weight to the lamp base.
There are 2 STLs for the necks, a short one and a tall one. Bother screw into the base and have the threads for the e14 socket.
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
3 x M3 by 8mm Screws
https://de.aliexpress.com/item/32443118299.html?
3 x M10 Mutter (Nut for weighting)
https://www.amazon.de/dp/B01M30BU88?
3 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
The slicer settings for the stand and screw on bottom piece:
.20 mm Standard and
(All standard settings and speeds, Random seam settings
Filament: eSun PLA+ Black
Examples using this base:
https://www.printables.com/model/854355-lamp-10