Tailors Chalk Gridfinity holder/grinder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.44 – €7.87 net (excluding VAT)
For file: chalk_holder v2_0.6n_0.3mm_PLA_MK3S_5h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.16 excluding VAT (range midpoint).
- Weight reported by the author
- 126 g
- Print time reported by the author
- 5.41 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Place to store and sharpen your chalk.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 77
- Makes
- 1
- Views
- 478
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
It is gridfinity. Based on my Fusion parametric gridfinity model so it comes with nice magnet holes, corner bases have them covered with 0,2mm to prevent edge lifting, 0,5mm clearance so it sits nice.
7 slots for chalk, just wide enough for standard tailors chalk (I use Prym ones). For the sharpener, insert 2 sections of 18mm snap off blade from utility knife. Usually, there is 7 sections per blade and you'll need 56 pieces. 3 piece per one blade means, you'll need 19 blades.
Buy the cheapest ones but be aware ONLY USE THE SAME BRAND AND MODEL. They differ slightly in size maker from maker, making them not align perfectly.
Just insert them into the slots, push them in using something straight, spread the glue on top of them.
PRINTING:
Just use your favourite gridfinity settings. Mine are PLA; 0,6mm nozzle; 15% lightning infill; 0,3mm layer height.