1 / 4
USB Type C Power Distributor without Interruption
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A “dumb” Usb Type C power distribution, for low power devices like ESPs
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A “dumb” Usb Type C power distribution thing, for low power devices like ESPs. It uses a Type C trigger board and 4 Type C break out boards.
The main advantage to normal type c chargers is that the power doesn't get interrupted for all devices if one is connected or disconnected.
BOM:
- Type C trigger board https://www.aliexpress.com/item/1005005545068349.html
- 4x Type C break out pcb https://www.aliexpress.com/item/4000388419305.html the blue one! It should come unseperated, you can leave it so.
- single stranded wire
- super glue
Instructions:
- set the trigger board to 5V via the dip switches
- glue the pcbs in the case
- remove the insulation of the wire
- solder it to the pcbs (see photos for reference)