AIRSOFT Taran Tactical Innovations (TTI) Combat Master Mag Catch Mechanism
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.34 – €0.41 net (excluding VAT)
For file: mag-catch_PLA_29m_2g.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spring-loaded mechanism for catching magazine
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Share Alike
DISCLAIMER: THIS IS FOR AN AIRSOFT GUN AND NOT ANY REAL WEAPON
Requires a typical spring from a ballpoint pen.
Printing recommendations:
PLA/PETG (I used PLA+)
0.2mm layer height
80% infill
3 walls
Tree supports ONLY for the catch flap itself and not for the screw-head nor the curved surface which interfaces with the magazine (see provided print file).