1 / 3
Solder Fume Extractor 60mm Fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a little solder fume extractor that I built from scrap parts I had at home. In addition to the printed part…
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 88
- Makes
- 1
- Views
- 900
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a little solder fume extractor that I built from scrap parts I had at home. In addition to the printed part you will need:
- 4x M4 screws (20-30mm)
- 60mm fan (5V+)
- USB cable
Switch with a diameter of 6mm I've chosen a 12V Sunon fan which will happily run with 5V from a USB power bank.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
No
Supports:
No
0.25mm
Filament: Filamentum PLA Grey
Notes:
Model is upside down. Turn around before printing!
Category: Electronics