Blinkenrocket Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've recently purchased a Blinkenrocket kit (http://blinkenrocket.de/) and figured it deserved a case. I've designed…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I've recently purchased a Blinkenrocket kit (http://blinkenrocket.de/) and figured it deserved a case.
I've designed this in FreeCAD. It is small enough to be printed on a Fabrikator Mini II.
Use the 'top_with_hole.stl' file in case you still want to be able to hang it around your neck!
Print Settings
Printer:
Fabrikator Mini II
Supports:
Yes
0.15 mm
Infill:
20%
Notes:
Infill and supports are only needed for the buttons, the case prints without them.
Post-Printing
You'll need 3 M3 screws to assemble the case. Add the buttons first to the top shell laying down, then the rocket and then screw the bottom on using the three screws.
Category: Electronics