Lamp #11
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
E14 long neck lamp shade that can use lamp base#3
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 51
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A shorter 145 mm lamp shade and snap-on cap that can be used Lamp Base#3.
https://www.printables.com/model/853136-lamp-base-3
Shade - 145 mm height x 100 Width
w/ Base - 250 mm height
A simple cylinder lamp shade with a 30 mm hole in the bottom to slide onto the lamp base neck and be attached with an e14 collar. An STL for a snap-on lid which can be attached to the top of the cylinder is included.
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
3 x M3 by 10 Screws
https://de.aliexpress.com/item/32443118299.html?
3 x M10 Mutter (Nut for weighting)
https://www.amazon.de/dp/B01M30BU88?
3 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
The slicer settings for thee14 Long Neck Base and Snap-On Cap:
.20 mm Standard
(All standard settings and speeds)
Filament: eSun Black PLA+
The Shade:
Filament: Sunlu PLA+ White
The slicer settings:
.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s
Seam Position- Aligned