Izzy Swan Thingy
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.59 – €6.83 net (excluding VAT)
For file: Izzy Swan Thingy Body v5_0.4n_0.2mm_PLA_MK4IS_3h53m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.21 excluding VAT (range midpoint).
- Weight reported by the author
- 126 g
- Print time reported by the author
- 3.89 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Izzy Swan designed this to use as a general workbench support for cuts and for aligning work with the vise
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 17
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Print the Body with snug supports just for the 2 clamp slots, support enforcers only. The Dovetail ledge prints with no supports. Slide the ledge into the Body when you need to align boards in your vise. You can slide it out when you're done. Now your board that you are working on can be aligned with the board in your vise for dovetails or any other joinery. Happy Printing!