1 / 3
V-Slot Adjustable Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece 40x40 feet for 20mm or 40mm v-slot frames. Screw height adjusts between 29mm and 39mm
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Two-piece feet that push-fit into a single or double v-slot (20/40). They're 40mm diameter legs with 35mm hexagonal feet, adjustable between 29mm and 39mm height.
These will print as orientated without support. I've used 20% gyroid infill with 3 wall line-count to hold an Ender 5s1 without a problem.
The large screw thread is custom and chunky. The offset v-slot insert is mostly for alignment but should hold these in place if you turn your printer over.