180° Bambulab X1C Door Hinge V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
180° Hinge for the BBL X1C and P1S
- Rating
- 5 / 5
- Likes
- 70
- Downloads
- 460
- Makes
- 2
- Views
- 2,620
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
I suggest using the .3mf file provided for convenience.
The part of the hinge that attaches to the glass door, has a void in the middle. This is for the print to be paused and the female end of a 6mm binding screw to be glued in place. (DO NOT USE THIN SUPER GLUE!! You don't want it dripping down onto the build plate. Use a gel super glue. ) I printed with a .2mm layer height and inserted a pause at the beginning of layer 47.
If you don't want to use the binding screw you can use the arms and gaskets from V1. This uses PETG (hinge body), TPU (gaskets) and PLA (supports).
The part of the bottom hinge that is mounted to the frame should be printed with 100% infill.
Guide for removing the old hinges and mounting the new ones.