Longer Z bracket for Elegoo Neptune 4 Plus/Max cable chain spine by edl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Longer bracket than the original to hold the cable more horizontal and keep the chain together.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 553
- Makes
- 2
- Views
- 2,358
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple redo of the original “z_bracket.stl” that is one of the 5 models in “Give your Elegoo Neptune 4 Plus/Max a spine, a cable chain spine” by edl (me).
This remix should help out the n4max folks as well as the n4+ as the added length of the bracket will keep the cable more horizontal with a bit less twist and in the case of the n4max pick up more a bit more weight of the longer cable.
Couple of notes:
If you are upgrading to this bracket you will most likely want to reduce the number of chain segments between it and the hot end by one given the added bracket length.
After getting the bracket in place, pull the slack out of the hot end cable where the z motor and fan wires spilt out of the cable. A slight pull of the cable leading to the the hot end will cinch up the spine nicely.