1 / 5
Prusa I3 R2 EVO Graduated Knob - Pomello graduato REV.2 — image 1
1 / 5

Prusa I3 R2 EVO Graduated Knob - Pomello graduato REV.2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For "Prusa i3 R2" by Nicola P. Hi, this is a new version of http://www.thingiverse.com/thing:1456211. I made 2…

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

For "Prusa i3 R2" by Nicola P.

Hi, this is a new version of http://www.thingiverse.com/thing:1456211.

I made 2 important changes:

a) the knob design, substituting it with a numbers graduated one

b) the structure, created with M3x5, M3x20 screws and a M3*12 Brass Female Hex Hexagonal Screw Nut Pillar.

The nut pillar is put inside the plastic knob and the 2 screws push one againts the other in it. This way you obtain a rigid block that can rotate up and down in the M3 threaded hole of the printing plate aluminium chassis.

Now the knob has 9 printed numbers, and considering that a complete turn produces a displacement in height of 0.35mm, you'll have the possibility to perform a fine tuning. More with the numbers you can read the position number for each corner and save it. This way before printing you could check the height of the four corners simply verifyng if the knob position numbers are the same of the saved ones.

Now if you need to move the plate up or down you have simply to rotate the knob of the same number positions for each corner.

Print Settings

Printer:

Prusa I3 R2

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.3

Infill:

30%


Notes:

ABS

Category: 3D Printer Parts

Tags