1 / 5
3D printable wheel for SWISS GEAR Trolley Laptop Backpack — image 1
1 / 5

3D printable wheel for SWISS GEAR Trolley Laptop Backpack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printable wheel for SWISS GEAR Trolley Laptop Backpack

Rating
0 / 5
Likes
0
Downloads
19
Makes
0
Views
176
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution

The rubber part of my "SWISS GEAR Rolling Case 15.6 L Trolley Laptop Backpack" wheel became damaged and started to come off the rim. I reasoned that I could repair it by rebuilding it in a 3D model and printing it!

As I printed it and fixed it, I also wanted to test it and took it for a ride on regular, decent roads. After covering few distances, I saw it peeling like layers at print resolution. but I thought I'd give it a try. I would recommend trying with TPU filament. 

Printer setting (Cura Slicer): 

Extrusion width (over all): 0.4

Perimeter generator: Brim

Change the print orientation accordingly 

Support:

Since it overhangs on top, I printed it with supports; you can try it without it too (I haven't tried though). 

Notes:

The inner holes are made for bamboo skewers or any 2.3-mm stiff rod of (length 16 mm) and a rough length of the same print material on the outside holes all the way through. Once both pieces are fixed, melt the extra filament that you inserted in the outside holes and plastic weld it so as to jam the joints and never come apart.

Tags