1 / 1
Wall brackets for boards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall brackets for boards and similar
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of simple wall brackets for hanging boards or similar to a wall using nails or screws.
You can chose from the following options:
- Nail or screw bracket
- 6mm and 8mm height
- clean model that will require support or models with a designed sacrifical layer that prints with bridging instead of support, but needs to be trimmed away after printing
- Extra: Spacers that can be glued to the lower part of a board to make it hang parallel to the wall
Printing
- use 3 or more perimeters for additional strength
- orient them flat on the print bed
- enable support for the clean models