Label frame (OpenSCAD parametrizable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Print, push the two parts together with a firm grip until they snap in and then use simple double-sided tape to glue to desired drawer, cabinet door or other appropriate place.
Once in place, you can insert/remove/replace paper labels as necessary
Pre-made STL files in two sizes:
70x50
102x64 (appropriate for inserting a business-card-sized label in it)
Other sizes can be easily made by re-creating stl from openscad while modifying parameter $width and $height (outer size in mm). For significantly smaller/larger sizes you may wish also to change $frame_width for thinner/thicker frame
Recommended print settings: PLA, 0.4mm nozzle, 0.2 mm layer