Lamp Base #4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
General purpose stand for an e14 socket. Useful for a lamp shade that has a solid top or any shade with a 35.2-36 hole
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 202
- Makes
- 0
- Views
- 926
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A general purpose circular stand for a lamp using an e14 socket. Can be used for a lamp shade that has a solid or closed top and needs a holder or one with either a 30,, or a 35.2-36 mm opening.
Easiest way to use is to measure your lamp shade opening and create a holder that is .15-.50 mm wider to hold the shade in place. See examples.
The hole in the holder should be be 35.5 to 36 mm in diameter for the wide e14 short or long necks.
There are 2 STLs for the necks, a short one and a tall one. Both screw into the base and have the threads for the e14 socket.
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
The slicer settings for the stand and e14 holders:
.20 mm Standard and
(All standard settings and speeds, Random seam settings
Filament: eSun PLA+ Black
Examples using this base:
https://www.printables.com/model/861933-lamp-14