Rinsing adapter French horn
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The adapter is used to rinse a French horn with a shower hose.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
We needed an adapter to thoroughly rinse a French horn.
The adapter is screwed into the hose of a shower and put into the French horn instead of a mouthpiece.
When the shower valve is opened, the horn gets rinsed.
Before I put this together I had no clue, how many different fittings there are for shower hoses. People claimed, it's mostly 1/2 inch, so I designed a ½ inch adapter - just to see when it started printing, that this is certainly too small → interrupted printing.
Then I checked one shower hose and found that it's ¾ inch, so I redesigned. This one fits this specific hose, but afterwards I saw that the other shower seemingly has an M22 (metric) thread.
So, before printing, better check if there are chances that it fits.
Printed using Prusa Mini+, 15 mm layer height and 10 K higher temperature than usual with PLA.