1 / 3
Clicking Ratchet Fidget Ring 2.0 (Print-in-place) — image 1
1 / 3

Clicking Ratchet Fidget Ring 2.0 (Print-in-place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An updated clicking fidget ring completely redesigned for even more clickiness!

Rating
4.568 / 5
Likes
609
Downloads
5,413
Makes
53
Views
12,466
Reviews
44

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a redesign of my original Ratchet Fidget Ring now optimized for more clickiness.

Overview

The ring features a ratchet mechanism to make it click and can be printed in one piece (print-in-place). The inner diameter is 18mm but I supply the parametric CAD files for various finger diameters.

Why?
  • Because many people liked the original but said it was not clicky enough
  • @winterattack_1622592 even tried to make the original more clicky but asked for an improvement so here it is
Printing

I tested this by printing it in Prusament Signal White PETG with a layer height of 0.15mm and a 0.4mm nozzle on a MINI+ but I think it should work with various print settings up to 0.2mm layer height.

Usage

Initially, the ring might be a bit stiff and hard to turn. You may require a small (!) amount of force to detach the inner ring. If it does not rotate easily enough, you can use a bit of oil or WD-40 to lubricate it.

 

 

Tags