Radial fan mount for ReprapPro Mendel Print Cooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reprappro had a simple print-cooler fan upgrade, but it expanded the X-Carriage too much, it sorta caused a decrease…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Reprappro had a simple print-cooler fan upgrade, but it expanded the X-Carriage too much, it sorta caused a decrease in Y size for tall objects. Also fan was out in the open, most of the air was cooling the bed instead of the print.
I wanted a 12V radial fan, so I designed this to mount it on the X-Carriage. If you have all 3 extruders installed you can't use this.
I had to print this in two parts and super glued it. One of the parts need to be printed with support. I used meshmixers supports. I included that part with supports.
The fan i used:
https://www.aliexpress.com/item/5015-12V-Cooling-Turbo-Fan-Brushless-3D-Printer-Parts-2Pin-For-Makerbot-Reprap-Prusa-i3-DC/32815755495.html
Category: 3D Printer Parts