Feet for cheap tripods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Elegant and simple solution to cheap tripods that are not stable and keep falling over.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of working with cheap tripods or selfie-sticks that are not stable and keep falling over but don't want to buy an expensive one?
→ Try using these 3d printed feet. It's a quick, easy and cheap solution :)
Product infos
Product dimensions: L=160mm, W=70mm, H=25mm
Insert dimensions: L=24mm, W=9mm, D=10mm
Two slots for anti-slip stickers underneath.
Recommended print settings:
→ default settings will work just fine
Printed with PLA+ white
220°C extr. temp. anf 60°C bed temp.
Layer Height: 0,2mm
Infill: 40% density (grid pattern)
NO Supports & NO Brims