1 / 5
MrkI Turltle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.39 – €6.59 net (excluding VAT)
For file: BASE-PRT2-TIBIA_0.4n_0.2mm_PLA_MINIIS_5h16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.99 excluding VAT (range midpoint).
- Weight reported by the author
- 90 g
- Print time reported by the author
- 5.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The MrkI Turtle is my first quadrupped robot design Software runs on a M0-ARM microcontroller
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 19
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
| QUANTITY | COMPONENT NAME | |
|---|---|---|
| 30 | × | M3 x 15mm Nylon hex spacers |
| 6 | × | Mg 90s micro servo |
| 4 | × | RS-2 servo https://servodatabase.com/servo/modelcraft/rs-2 |
| 18 | × | M3x12mm hex bolt |
| 16 | × | M3x8mm hex bolt |
| 18 | × | M3 flat nut |
| 12 | × | M3 Self Lock Nut |
| 24 | × | M2x8mm Self tapping screw |
| 2 | × | 0A41SK0F Infrared sensors |
| 4 | × | F693ZZ (3x8x4mm bearing) |