Tri-Lug Socket adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool to install Tri-Lug muzzle devices using a 24mm deep socket.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 141
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This allows you to use a 24mm Deep socket to install/remove a Tri-Lug muzzle device.
This fits over a Tri-Lug muzzle device and inside of a 24mm socket, then use a torque wrench to install to required torque per manufacturer.
I printed it in ASA at 100% infill on a BBL X1C. After using it to install a muzzle device to 35 /Lbs/Ft there is a bit of deformation on the adapter, but it worked perfectly well. This will not last forever, but if you are like me and just need to install a couple Tri-Lugs and don't want to spend $40 on a proper tool, this will do the job. It is pennies of material and 30 minutes on the printer. Job done.