Thin center support for Spice Rack by LittleDangerous
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A narrowed center support remix for LittleDangerous' spice rack that better matches the end pieces.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I'm a fan of the spice rack design by @LittleDangerous and have been using it for years. The latest version updated the design to use full width Large 3M Command Strips for better adhesion to the mounting surface, but that also meant that the center support became wider as well for easy printing.
It didn't look quite right to me, so I put the center support “on a diet” and thinned it down to match the proportions of the end pieces. The unfortunate result of doing that is you are now unable to print this thinner remix without supports. To keep the same aesthetic, and depending on which way your cabinet door opens, you will want to place it either left side or right side facing the print bed so the “ugly” support side faces inwards when the door is open.
The example is printed in PrintedSolid Jessie PLA using a 0.4mm nozzle with the 0.20mm SPEED profile, and "Support on build plate only."